MIL-PRF-28861/1D
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1.
Weight: 5 grams maximum.
*
Case finish: T, S, or G in accordance with MIL-PRF-28861 (pure tin finish is prohibited).
*
Mounting hardware: Shall be furnished with the same finish as the filter case (pure tin finish is prohibited).
Terminals: Solderable.
Operating temperature range: -55°C to +125°C.
Rated voltage: See table I.
Rated current: 15 amperes.
Capacitance: See table I.
Dissipation factor: 3 percent maximum.
Voltage and temperature limits of capacitance: +15 percent, -40 percent.
Insulation resistance:
At +25°C: 1,000 megohms minimum or 1,000 megohm-microfarads minimum, whichever is less.
At +125°C: 100 megohms minimum or 100 megohm-microfarads minimum, whichever is less.
Insertion loss: See table I.
Voltage drop: 0.12 V dc maximum.
DC resistance: 0.008 ohm maximum.
-7
3
Seal: In accordance with MIL-PRF-28861. Leakage rate for class S filters shall not exceed 1 x 10 atm cm /s.
Temperature rise: +25°C maximum.
Solderability of terminals: In accordance with MIL-PRF-28861.
Product assurance level: In accordance with MIL-PRF-28861 and table I.
Part or Identifying Number (PIN): The PIN shall be as follows:
X
X
M28861/01 - XXX
|
|
|
|
|
|_______
Dash no. in
Case finish
Product assurance
accordance
level in accordance
with figure 1
with MIL-PRF-28861
and table I
and table I
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business