MIL-PRF-28861/12G
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1. Filters and capacitors shall be hermetically sealed on one end as
shown in figure 1 for the respective style.
Weight: .25 gram maximum for C circuit parts.
.75 gram maximum for L circuit parts.
Case and lead finish: G only (gold plated).
Terminals: Solderable.
Operating temperature range: -55°C to +125°C.
Rated voltage: See table I.
Rated current: 5 amperes, maximum.
Capacitance: See table I.
Dissipation factor: 2 percent maximum for capacitance values 10 pF through 100pF and 3 percent maximum for
values greater than 100pF.
Voltage and temperature limits of capacitance: +15 percent, -40 percent.
Insulation resistance:
At +25°C: 1,000 megohm-microfarads, or 100,000 megohms minimum, whichever is less.
At +125°C: 100 megohm-microfarads or 10,000 megohms minimum, whichever is less.
Insertion loss:
At +25°C: In accordance with table I.
At -55°C and +125°C: A 3 dB degradation from +25°C value shall be allowed.
Voltage drop: 0.05 volt maximum.
DC resistance: 0.01 ohm maximum.
Seal: Not applicable.
Temperature rise: +25°C, maximum.
Solderability of terminals: In accordance with MIL-PRF-28861, except the temperature of the solder shall be
+300°C +0°C, -5°C.
Resistance to soldering heat: In accordance with MIL-PRF-28861, except the temperature of the solder shall be
+300°C +0°C, -5°C.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business