MIL-PRF-28861/12G
Part or identifying Number (PIN): The PIN shall be as follows:
M28861/12-
XXX
G
X
│
│
│
Dash no.
Case
Product assurance
per figure 1
finish
level per MIL-PRF-28861
and table I
and table I
Marking: Class B capacitors and filters shall not be marked. Class S filters and capacitors shall be marked with a
green dot in accordance with FED-STD-595/14187. Full marking, in accordance with
MIL-PRF-28861 shall be marked on the unit package.
Soldering temperature: Caution: These devices shall not be exposed to soldering temperatures exceeding
+300°C. Exposure time to soldering temperature of +300°C shall not exceed 1 minute.
Installation note: These devices are intended to be installed into hermetically sealed packages with the glass seal
oriented toward the outside world.
Cataloging information: Circuits `C's shall be cataloged under FSC 5910 as feed-through ceramic capacitors.
Circuits `L's shall be cataloged under FSC 5915 as radio frequency interference filters.
Reference documents: In addition to MIL-PRF-28861, this specification sheet references the following documents.
Changes from previous issue: The margins of this specification are marked with vertical lines to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government assumes
no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
requirements of this document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 85
DLA CC
NASA - NA
(Project 59GP-2012-001)
Review activities:
Army - AR, AT, AV, MI
Navy - AS, MC, OS, SH
Air Force - 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using ASSIST
Online database at https://assist.daps.dla.mil.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business