MIL-PRF-15733/49K
Thermal shock and immersion: In accordance with MIL-PRF-15733 and the following:
Measurements after final cycling shall include:
Capacitance change: Not more than 20 percent for dash numbers -0008 and -0010.
Shock (specified pulse): In accordance with MIL-PRF-15733 and method 213 of MIL-STD-202, test condition I
(-0001, -0002, -0003, -0004, -0006 through -0008, and -0010); and test condition A (-0005).
Vibration, high frequency: In accordance with MIL-PRF-15733 and method 204, MIL-STD-202. The following
details and exceptions shall apply:
Test condition: D (20 g's).
Temperature conditioning (-0002 through -0005 only): Prior to vibration in each plane, filters shall be placed in
an oven and heated to +125C plus one-half the temperature rise (-0002 through -0004) and to +85C plus
one-half the temperature rise (-0005). Vibration in each plane shall begin within 5 minutes after removal of the
filters from the oven.
Moisture resistance: In accordance with MIL-PRF-15733 and the following:
Polarization voltage: 50 volts dc.
Measurements after 24-hour drying period shall be as specified in MIL-PRF-15733 and for 0008 and 0010 the
capacitance shall change no more than 20 percent from initial measured value.
Life: In accordance with MIL-PRF-15733 and method 108, MIL-STD-202. The following details shall apply:
Test condition:
For qualification inspection: D (1,000 hours).
For group C inspection: B (250 hours) for -0001, -0003 through -0008, and -0010; D (1000 hours) for -0002.
Marking: Filters shall be marked in accordance with MIL-PRF-15733. The following details shall apply:
Minimum marking (-0001): Filters shall be marked with the PIN and terminal identification, as a minimum. The
full marking specified in MIL-PRF-15733 shall be marked on the unit package.
Full marking (-0002): Filters shall be marked with the full marking specified in MIL-PRF-15733.
Minimum marking (-0003 through -0008, and -0010): Filters shall be marked with the PIN, source code, date
code, and terminal identification. The full marking specified in MIL-PRF-15733 shall be marked on the unit
package.
Part or Identifying Number (PIN): M15733/49-(dash number from table I).
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business